Nitrogen Gas Generator

type Nitrogen gas generators provide high nitrogen purity. easy to maintain
Type of Nitrogen Generator : Type of Nitrogen Generator
nitrogen gas generator This can be divided into main parts.
Pressure Swing Adsorption : PSA Nitrogen Generator

Membrane

Granular Nitrogen Gas Generator : PSA Nitrogen Generator is the use of Carbon Molecular Sieve : CMS. absorb oxygen molecules and allow pure nitrogen gas to pass through and store in the nitrogen holding tank for use in various industries

such as
food and beverage industry
electronics industry
packing industry
chemical industry
petroleum industry
waste disposal industry
laboratory

By virtue of the properties of nitrogen gas. that is an inert gas in the engineering process or manufacturing process in the factory It prevents reactions with chemicals in the system. Nitrogen air is therefore very useful in industry.

working principle of nitrogen gas generator

Working of Nitrogen Generator Starting from the air that comes from the air compressor (Air Compressor) through to the air dryer (Air Dryer). to dry the wind The more dry the air, the more beneficial it is for the nitrogen generator because the granule used in the nitrogen generator is a Cabon Molecular Sieve.

Will last a long time without water, oil and dust.

Carbon Molecular Sieve

When the compressed air passes through the Air Dryer, it will pass through the air filter as well. Main line filter that has the ability to filter particles size 5, 1, 0.01 microns.
and Activated carbon filter to filter oil particles. Provides clean, oil-free compressed air To extend the life of the Cabon Molecular Sieve granules to more than 10 years, clean compressed air is stored in the air recovery tank. to prepare for the next nitrogen gas generator Inside the nitrogen gas generator It contains 2 barrels of Cabon Molecular Sieve.

based on the principle of molecular size of Nitrogen, which is larger than oxygen molecules. This causes the wind to pass through the Cabon Molecular Sieve (CMS).

will be a nitrogen molecule that can pass through But the oxygen molecules are adsorbed in the Cabon Molecular Sieve (CMS).

Inside the nitrogen gas generator is a switch operation. Inside the nitrogen gas generator there is a Cabon Molecular Sieve (CMS).

Containing 2 tanks, when the first tank is working absorb oxygen molecules Nitrogen air will flow to the nitrogen air storage tank. And when the second tank is working, the Cabon Molecular Sieve (CMS) will absorb molecular oxygen (PSA Nitrogen Generator). It will be vented from the nitrogen gas generator. Nitrogen air from the second tank will flow to the nitrogen holding tank as well.

Nitrogen purity will be checked before leaving the nitrogen gas generator. If the purity of air nitrogen is not obtained The wind will then be given back through the production process again. But if the purity of the nitrogen wind has been set Nitrogen air can then be released from the nitrogen gas generator to use.

Working of PSA Nitrogen Generator

Purity and size of nitrogen gas generator
Nitrogen Generator can produce nitrogen gas with purity ranging from 95%, 97%, 99%, 99.9%, 99.99%, 99.999%.

The purity and flow rate can be adjusted. and can produce nitrogen gas up to 6,000 Nm3/hr as well as the nitrogen gas generator There is also a screen showing the operation of the machine. display values such as purity value (Purity), flow rate (Flow rate), Dew point, Pressure
of wind and nitrogen Including opening-closing of each valve position convenient and easy to use
Nitrogen generator  เครื่องผลิตไนโตรเจน